Built laptop. will it start?

merely build my first pc computer. powered it up and worked o.k, it consequently said press F1 or Del. I pressed F1 and and is said verirfying DMI pool Data . update success.



PXE-E61: medium test damp squib, check cable



and what is Disk Boot failure, insert system and press enter

Built laptop. will it start?

Error: PXE-E61: Media oral exam failure, check cable.

PXE-MOF: Exiting Intel(R) ROM



Cause:

This is an expected operation. In the Boot Device priority setting surrounded by BIOS, you will see Removable Dev. (floppy), Hard Drive, ATAPI CD-ROM, and typically last is Intel(R) UNDI PXE 2.0. This setting will attempt to boot rotten a remote agent using the onboard NIC. By seeing this message it means the PC cannot find a boot dividing wall on the floppy disk, hard drive or the disc ROM to load the operating system.



Solution:





Install an operating system or put surrounded by a bootable device into the floppy or CDROM.



If you do not plan to boot to a remote boot host, you may disable the Intel(R) UNDI PXE 2.0 option from the BIOS setup utility boot lay down.



Relevant Information:



No operating system installed

C drive does not have an operating system loaded

No bootable floppy diskette surrounded by diskette drive
Try the sites below:
Put the OS CD contained by the CD drive next restart...
Try and build another one.